English 
Basic Functions
KF932 IEC61850 Relay Tester is developed based on the intelligent substation related standards to analyze the SV, GOOSE, IRIG-B and IEEE1588 message, calculate the magnitude, phase and frequency of voltage and current, and real-time monitor of GOOSE virtual terminal.
Receiving closed-loop testing of smart devices via SV, GOOSE message sending, subscription and publication of GOOSE messages.
Phase detection function is achieved by analyzing and calculating different control blocks; Binary input and output of the hard contact can be completed on the intelligent operation box transmission delay and SOE on the accuracy of the measurement.
SV and GOOSE exception statistics analysis and synchronization function to achieve the integration of the unit discrete, lost frame and absolute delay measurement.
With small size, touch screen operation of the convenience and powerful measurement and analysis and testing capabilities, greatly to meet the intelligent substation operation, maintenance and debugging of the protection, monitoring and control devices, IEC61850 complying IEDs, the merger unit and the station control system Detection and commissioning requirements.
| Power Supply | |
| Battery | Large capacity lithium battery |
| Power Adapter | Input：AC100～240V, 50/60Hz, 0.7A |
| Output：DC15V, 1.66A | |
| Power Consumption | |
| Power consumption | ≦6W |
| Working power supply | Continuous work for more than 10 hours |
| Optical Ethernet Communication Port | |
| Model | 100Base-FX (100M Full duplex optical fiber network) |
| Port Type | LC |
| Wavelength | 1310nm |
| Transmission distance | ≧1km |
| Application | IEC61588 Times and other network messages |
| Optical Serial Port Communication Interface | |
| Port number | 2 pcs |
| Port Type | ST |
| Wavelength | 62.5/125μmMultimode fiber, Wavelength850nm |
| Transmission distance | ≧1km |
| Application | Receive/Send IEC60044-7/8(FT3), IRIG-B Timing signal transceiver |
| Analog Input Communication Interface | |
| Port number | 1 pair |
| Port Type | Rubber terminal |
| Hard contact input/output communication interface | |
| Port number | 2 pairs |
| Port Type | Aviation socket to rubber terminal |
| TF Card Slot Interface | |
| Port number | 1 pc |
| Application | TF card for importing the whole station configuration file, recording documents, storing/exporting test reports and upgrading software. |
| Analog input communication interface | |
| Port number | 1 pair |
| Time Signal | |
| IRIG-B | Time accuracy<1us typ |
| IEC 61588 | Time accuracy<1us typ |
| Mechanical Parameters | |
| Display screen | 4.3' touch LCD screen |
| Size | 176×100×58 mm |
| Weight | ≦0.75kg |
| Temperature Range | |
| Altitude | ≤5000m |
| Ambient temperature | Normal operating temperature：-10～55℃ |
| Storage and transportation：-25～85℃ | |
| Relative humidity | 5％～95％ |
| Atmospheric pressure | 60～106KPa |
| No. | Analysis Item | Analysis content |
| SMV Measurement and analysis | Interception | Automatically intercepts SV messages from 3 optical ports and 1 optical interface |
| Effective value | Real-time display channel of amplitude, phase and frequency | |
| Oscillography | Real-time display of waveform | |
| Sequence component | Real-time display the positive sequence V1, negative sequence V2, zero positive sequence V0 of magnitude and phase | |
| Power | Real-time display of ABC phase and three-phase active, reactive power, apparent power and power factor | |
| Vector graph | The magnitude and phase relationship of the three-phase voltage and current are displayed in vector form | |
| Harmonic | Real-time display 0 ~ 19 harmonics, and show the harmonic content in the form of histograms | |
| Message parameter | Real-time display of the current message parameters, the original message and parsed message | |
| Abnormal message | The number of abnormal message | |
| Discrete Value | The number of messages in each discrete | |
| GOOSE analytic and analysis | Interception | Automatically intercepting GOOSE messages from 3 optical ports |
| Virtual terminal | Real-time display of the status of the virtual terminal, support a variety of display. Automatically record the reset time of the virtual terminal. | |
| Message | Real-time display of the current message value and the original message value. | |
| Abnormal message | The number of abnormal message | |
| Others | Recorder | Record and analyze off-line messages |
| Measurement of flow and optical power | Real-time statistics of network traffic size and received optical power | |
| PCAP message analysis | Offline analysis of messages stored in PCAP format | |
| Polarity test | Test the polarity of the transformer | |
| Measurement | Manual test | Through the output of SV messages, GOOSE message simulation and sub subscription together with the binary input and output of hard contact to protect, monitor and control of the IED device test. |
| State sequencer | By outputting multiple consecutive states, for user-defined tests.For each individual state, the magnitude, phase, and frequency of the voltage and current can be set. Setting up the status of GOOSE virtual terminals to meet various test requirements. | |
| IED | Measuring the transfer delay and SOE time accuracy between the GOOSE and the hard contact. | |
| Superimposed harmonic | 2~19 harmonics are superimposed on the output fundamental voltage and current to realize the test of IED devices such as protection, measurement and control. |
